FEATURES
* Hardened And Ground Bed Way
* Tang In Tailstock
* Safety Electrical Disconnect
* Foot Brake
* Low Voltage Controls
* Adjustable Apron Clutch
* Inch/Metric Gear Box
* Full Length Splash Guard
* Pressure Lubrication For Headstock
* 5 Position Feed Kick Out
* External Oil Filter
* 3 Bearing Supported Spindle
|
SPECIFICATIONS |
1440 JN |
|
| CAPACITY | Swing Over Bed | 14" |
| Swing Over Cross Side | 8.3" | |
| Swing In Gap | 19.7" | |
| Distance Between Centers | 40" | |
| Bed Width | 11.8" | |
| SPINDLE | Spindle Nose | D1-6 |
| Spindle Bore | 2" | |
| Taper of Spindle | MT NO.5 | |
| Spindle Speeds | 12 SPEEDS 76~2000 RPM | |
| TRAVEL | Cross Slide | 10.4" |
| Compound Slide | 4" | |
| THREADS & FEEDS | Inch Threads | 23KINDS 4~48TPI |
| Metric Threads | 17KINDS 0.5~6.5MM | |
| Longitudinal Feed | 0.0015~0.0196 IPR | |
| Cross Feed | 0.00075~0.0098 IPR | |
| TAIL STOCK | Quill Diameter | 2.4" |
| Quill Travel | 4.7" | |
| Quill Taper | MT NO.4 | |
| POWER | Spindle Drive Motor | 5 HP |
| Voltage | 220/440V AC / 3PH | |
| Coolant Pump | 1/8 HP 220/440V AC / 3 PH | |
| WEIGHT | Net Weight | 3,750 LBS |
| Dimension L.xW.xH. | 85.8" x 33.5" x 46.7" | |
© 2010 Jorgenson Machine Tools • All Rights Reserved.
