Home / New Equipment / Iron Workers / The Piranha Single Series / Piranha Single P-70
Categories
Manufacturers
The Piranha Single Series

Piranha Single P-70

* Complete Punching Attachment with split dove tail mounting
* 10 Punch and Die sets
* 12″ bending Attachment with split dove tail mounting
* Automatic Urethane Hold Down on the Punch Stripper and on Angle
* Plate and Bar Shear
* Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
* Remote Electric Foot Switch that can be connected at either end of the machine
* Electric Limit Switches that can be set for stroke control when using foot control
* Set of Round Bar Knives [2 way] (customers choice to 2)
* Set of 14.50 Plate Shear Knives [4 way]
* Extra Blank Knife to extend shear to 18″
* Set of Angle Knives [8 way top] [4 way bottom]
* Set of Coper Knives [2 way top] [4 way bottom]
* Chip Buckets (2 each)
* Extra Oil Filter
* Coupling Wrench & 3/8″ Allen Wrench
* Integral Lifting Lug for instant portability

CAPACITIES & SPECIFICATIONS: MODEL P-70 70 TON
Throat Depth 10" Open Height 15"
Closed Height w/o Die Block 10-1/8" Work Stations From Floor 42"
Hydraulics:
Pump GPM
System R/V PSI
15
2600		 Stroke Length 4-7/8"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/4" to 1-1/2"
1/2 " to 1"		 Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request		 15 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)		 70 Tons
1-3/16" thru 3/4"
*4-1/2" thru 3/16"
12"X21"		 Coper-Notcher (Tons)
(Mat.)		 75
3-1/2" x 5" x 3/8"
Dimensions
(NET) W-L-H
31 "x79"x64"		 Plate Shear 18" Long
1" x 6"
3/4" x 12"
1/2" x 18"
Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 4250
Strokes Per Minute 30 @ 3/4" Angle Shear (Max.) 5" x 5" x 1/2"