Home / New Equipment / Iron Workers / The Piranha Single Series / Piranha Single P-50
Categories
Manufacturers
The Piranha Single Series

Piranha Single P-50

* Complete Punching Attachment with split dove tail mounting
* 14 Punch and Die sets
* 8″ bending Attachment with split dove tail mounting
* Automatic Urethane Hold Down on the Punch Stripper and on Angle,
* Plate and Bar Shear
* Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
* Remote Electric Foot Switch that can be connected at either end of the machine
* Electric Limit Switches that can be set for stroke control when using foot control
* Set of Round Bar Knives [2 way] (customers choice to 1-1/2″)
* Set of 12.125 Plate Shear Knives [4 way]
* Set of Angle Knives [8 way top] [4 way bottom]
* Set of Coper Knives [2 way top] [4 way bottom]
* Chip Buckets (2 each)
* Extra Oil Filter
* Coupling Wrench & 3/8″ Allen Wrench
* Integral Lifting Lug for instant portability

CAPACITIES & SPECIFICATIONS: MODEL P-50 50 TON
Throat Depth 8" Open Height 13-1/2"
Closed Height w/o Die Block 9-1/4" Work Stations From Floor 42"
Hydraulics:
Pump GPM
System R/V PSI
10.5
2600		 Stroke Length 4-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/4" to 1-1/2"
1/2 " to 1"		 Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request		 10 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)		 50 Tons
13/16" thru 3/4"
*5" thru 1/8"
10"X17"		 Coper-Notcher (Tons)
(Mat.)		 56
2-3/4" x 4" x 1/4"
Dimensions
(NET) W-L-H
24 "x66"x60"		 Plate Shear 15" Long
3/4" x 10"
5/8" x 15"
Bending Attachment 8" Optional Lengths Available Weight (NET) lbs 2600
Strokes Per Minute 60 @ 1/2" Angle Shear (Max.)
w/Special Blade		 5" x 5" x 3/8"
4" x 4" x 1/2"