Home / New Equipment / Iron Workers / The Piranha Dual Series / The Piranha Model Dual PII-140
Categories
Manufacturers
The Piranha Dual Series

The Piranha Model Dual PII-140

* Complete Punching Attachment with stripper
* 10 Punch and Die sets
* Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
* Front and rear 2 position joy stick controls (electric)
* Front and rear Remote Electric Foot Switches
* Front limit switch stroke control
* Set of Round Bar Knives [2 way] (customers choice to 2″)
* Set of 14.5″ Plate Shear Knives [4 way]: For PII-110
* Set of 16.625″ Plate Shear Knives [4 way]: For PII-140
* Set of 20.5″ Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625″ Plate Shear
* Knives: For PII-140
* Extra Blank Knife to extend shear to 18″ on PII-110 or 20.5″ on PII-140
* Set of Coper Knives [2 way top] [4 way bottom]
* Set of Angle Shear Knives [2 way top] [4 way bottom]
* Chip Buckets (coper end)
* Extra Oil Filter
* Coupling Wrench
* Intergral Lifting Lug for instant portability

CAPACITIES & SPECIFICATIONS: MODEL PII-140 140 TON
Throat Depth 20.5" Open Height 14"
Closed Height w/o Die Block 7-3/4" Work Stations From Floor 44"
Hydraulics:
Pump GPM
System R/V PSI
15
3700		 Stroke Length 7"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)		 1/2" to 2"
1/2" to 1-3/8"		 Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request		 20 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)		 140 Tons
*1-3/4" thru 1"
5-5/16"
16" x 36"		 Coper-Notcher (Tons)
(Mat.)		 95
4" x 6" x 3/8"
Dimensions
(NET) W-L-H
38 "x120"x85"		 Plate Shear 20-1/2" Long
1" x 14"
3/4" x 18"
1/2" x 20"
Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 11,930
Strokes Per Minute (Approx.) 24 @ 1" Angle Shear (Max.) 6" x 6" x 5/8"