SpecificationsModelVMC-4020B-IITravel X axis (in.)40Travel Y axis (in.)20Travel Z axis (in.)20/30*Table size (in.)47.25 x 19.7Max. weight on table (lbs.)1,320Floor to table surface (in.)34Spindle nose to table (in.)4.7 to 25.1 / 4.7 to 35*Spindle center to column (in.)21.25T-slots and dimensions (in.)(5) 3.75 x .709 x 1.25Way constructionBoxCutting feed rate (ipm)590Rapid travel rate X/Y/Z (ipm)1,000 / 1,000 / 1,000Axis drive motor X,Y & Z (hp)2.4, 2.4, 2.4Ballscrew size (mm.)40Accuracy positioning - JIS B6338 (in.)0.0002Accuracy repeatabililty - JIS B6338 (in.)0.0001Power transferFadal automatic 2-speed mechanical Hi / LowSpindle speed (RPM)10,000Spindle taperCAT-40 / BT-40*Spindle power - Peak (hp)15/22.5* High torqueOptional (220 ft lbs.)Spindle chillerStandardSpindle orientationStandardRigid tappingStandardATC typeDual armATC tool selectionRandomNumber of tools24Max. tool diameter (in.)4.9Machine weight (lbs.)11,770* optional
• specifications are subject to change"Where's the Beef?" as the Lady Used to SayThe new Series-II VMC-4020R machines are designed for parts producers who need a full-featured machining center with low operating cost. Brought to market specifically to address the issue of smaller shops or start-ups or any company looking to shop to a tight budget, but have a minimal capital investment dollars to spend.With a list of standard capabilities as long as your arm, the new VMC-4020R-II vertical machining center boasts some pretty attractive features. This machine comes standard with a 24-position tool holder, which as good as that is can be expanded to 30 tool positions or even 40 tool positions!Of course, it doesn't hurt that it also offers a 10,000 r.p.m. spindle with plenty of torque, a typically oversize table, with stretched X, Y, Z axis travel, and a very easy to acclimate to CNC controller. The positive attributes of the new 64MP CNC controller would need enough space here to double our page size, so for the best description of the controller’s F & B’s, please contact your Jorgenson Machine Tool Representative.So, Where Can I Get the New Series-II VMC-4020B?Well, if you’re lucky enough to have your zip code reside in the “Inter Mountain West" region of the U.S. (specifically the states of Utah, Idaho, Montana or Wyoming in this case) then the answer to that question is Buds Machine Tools. Headquartered in Salt Lake City, Utah for the last 50 years, Buds Machine Tools has been providing quality machine tools of almost every variety.Be your next machine acquisition new or used, whether you are close by or a long way off, Buds Machine Tools is one of the few dealers able to service your account as though your company was just up the road from us. Our seasoned parts technicians will go the distance to get you what you need, when you need it. Combine those resources with an experienced sales staff and the technical support from Fadal Engineering, we think is answer is obvious. Buds Machine Tools: “Strong on Service.”
