Unavailable

Fadal VMC-8030B-II Vertical Machining Center

CNC Milling Machines
Manufacturer:
FADAL
Model:
VMC-8030B-II
Condition:
New - In-Stock
Stock #:
1081
Fadal VMC-8030B-IIVertical Machining CenterAxis Travels: 80" x 32" x 30"The first thing you notice when you stand in front of a Fadal VMC-8030B-II vertical milling machine is that this machine is big. Way big.With a table that’s almost 7 feet long and 30 inches wide, you can flat out put some big piece parts on this thing. The table will take a massive 4800-pound load and feed it in the “X” direction for 80 inches. “Y” travel is 32 inches and “Z” travel is 30.Now, all the stats in the world don’t mean much if the machine isn’t accurate, right? Well the Fadal VMC-8030-II is quite accurate — how about two tenths positioning accuracy with an astounding one tenth repeatability! Is that accurate enough for you?

SpecificationsModelVMC-8030B-IITravel X axis (in.)80Travel Y axis (in.)32Travel Z axis (in.)30Table size (in.)81.5 x 30Max. weight on table (lbs.)4,800Floor to table surface (in.)32Spindle nose to table (in.)5 to 35Spindle center to column (in.)34.375T-slots and dimensions (in.)(5) 5.5 x .709 x 1.25Way constructionFour Box WayRapid travel rate X/Y/Z (ipm)787 / 787 / 590Axis drive motor X,Y & Z (hp)4.4, 4.4, 4.4Ballscrew size (mm.)50Accuracy positioning - JIS B6338 (in.)0.0002Accuracy repeatabililty - JIS B6338 (in.)0.0001Power transferFadal automatic 2-speed mechanical Hi / LowSpindle speed (RPM)10,000Spindle taperCAT-40 / BT-40*Spindle power - Peak (hp)22.5High torqueStandard (225 ft. lbs.)Spindle chillerStandardSpindle orientationStandardRigid tappingStandardATC typeDual armATC tool selectionRandomNumber of tools24Max. tool diameter (in.)4.9Machine Dimensions L x D x H (in.)216 x 138 x 132Machine weight (lbs.)34,600* optional
• specifications are subject to changeSo, the VMC-8030B-II Is Big. What Else Does It Have Going On?With a 10,000 r.p.m. spindle and the torque and horse power to run a 5-inch milling cutter. The 8030 is set up to take some serious cuts. As most companies that run big milling machines that take heavy feed rates everyday know, these machine spindles will begin to get hot as the work day progresses. Most every machine manufacturer offers a “chilling system” to keep the heat down in a hardworking spindle, Fadal puts chillers on the VMC-8030-II and then decides to make them part of the standard equipment package. While we are on the subject of standard equipment, what else does the 8030 have that we should know about? The high torque spindle delivering 225 foot pounds of torque is worth mentioning, as is the machine's ability to rigid tap with spindle orientation.Automation Is Great, but You Can’t Do Anything Without ToolsThe A.T.C. (or automatic tool changer) on the new Fadal VMC-8030B-II is also worthy of note. The tool changer’s characteristics include a dual arm design with random tool selection, this tool changer is stout enough to handle a 15-pound tool holder/tool combination and has a standard 24 position magazine. Speaking of automatic tool changers, the tool changer on the 8030 can be had with a 30-position changer or even a 40-position changer for those customers that need the extra capacity. Couple the extra holders with the ability to select randomly, and you have a machine that is capable of intricate and challenging machining.    What Was the Vision of the VMC-8030B-II?Fadal’s VMC-8030B-II Series vertical machining center is built for large parts and heavy metal removal. The machine is designed to deliver high material removal rates, and reduced part cycle times while holding increased positioning accuracy and repeatability. This machine weighs 34,600 lbs. and its heavy four box ways design result in maximum vibration damping. The box ways are hardened, ground and utilize non-metallic liners that are virtually friction-free on all way and gib surfaces to ensure vibration-free cutting for consistently closer tolerances.Where Can You Access the Productivity of Fadal Milling Machines? If you happen to call the Mountain Time Zone your home, chances are Buds Machine Tools is your stocking dealer of reference. Jorgenson is the authorized distributor of Fadal machines in Utah, Idaho, Montana and Wyoming.Buds Machine Tools set up shop in Salt Lake City Utah half a century ago, supplying local and regional customers with whatever machine tools they needed. As time progressed, Jorgenson began to hone in on the mainstay of the business which was fabrication machinery predominantly. (As with all things Jorgenson, when these folks put their mind to something they are usually successful.)Jorgenson began to gain market share and build a reputation that is the very definition of our motto, “Strong on Service.” That simple philosophy has blessed us with a loyal customer following that — combined with the power of word of mouth — has caused us to grow into the strong vibrant company we are today. From installing and training on your machine, either new or used, to a parts department, to service techs, to telephone support, Buds Machine Tools does it all. That’s why we say, Buds Machine Tools, “Strong on Service.”

Loading...
Loading...
Loading...